Nova - Laser System
The NOVA laser cutter carries all the best functions like Hybrid servo motor and excellent engraving quality with high resolution etc.Users can also choose RF tube to reach an even higher cutting and engraving quality.And we also add much more user friendly designs to this excellent series.Learn More
Laser System NOVA 24 NOVA 35 NOVA 51 NOVA 63 Laser Tube Wattage 40-60Watt 80-100Watt 100-130Watt 100-130Watt Work Area 600x400mm(23.6" x 15.7") 900x600mm(35.4" x 23.6") 1300x900mm(51.2"x35.4") 1600x1000mm(63.0"x39.4") Max Part Size (WxLxH) Front door closed
700x530x170mm(after taking out the honeycomb bed)(27.6" x 20.9" x6.7")
1000x730x230mm(39.4" x 28.7" x9.0")
1400x1030x230mm(55.1" x 40.6" x9.0")
1700x1130x230mm(66.9" x 44.5" x9.0")
700x∞x20mm(27.6" x ∞" x 0.8")
1000x∞x20mm(39.4" x ∞" x0.8")
1400x∞x20mm(55.1" x ∞" x0.8")
1700x∞x20mm(66.9" x ∞" x0.8")
Table Size 700x530mm(27.6" x 20.9") 1000x730mm(39.4" x 28.7") 1400x1030mm(55.1" x40.6") 1700x1130mm(66.9" x 44.5") Z Axis Height 150mm(5.9") 230mm(9.1") 230mm(9.1") 230mm(9.1") Dimensions(WxDxH)
1070x810x610mm(42.1" x 31.9" x24")
1500x1105x1040mm(59.1" x 43.5" x40.9")
1900x1405x1040mm(74.8" x 55.3" x40.9")
2200x1505x1040mm(86.6" x 59.3" x40.9")
310kgs(683lbs) 430kgs(948lbs) 470kgs(1036lbs) Laser Type Sealed Co2 Glass Laser Tube Cooling Water Cooled Motion Control System High-Speed Hybrid servo motors Maximum Speed 1000mm/S(39.4 IPS) Speed and Power Control (engraving depth) Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping. Operating Modes Optimized raster, vector, and combined mode Resolution(DPI) User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head) Computer Interface Ethernet and USB Connection Compatible Operating Systems Windows XP/2000/Vista/7/8/10 Buffer Memory 128MB Standard Display Panel 3.5" LCD panel showing current file, total working time, laser power, speed etc. Electrical Requirements 110 to 240 volts, 50 or 60 Hz, single phase Ventilation System Integral exhaust fan.There is 1 output port, 5.7" (145 mm) in diameter in the rear of the case.
FAQLaptop& Desktop PC both ok, as long as your operating system is Windows XP/2000/Vista/7/8/10. But if you use a Mac you need to buy a Lightburn software with $80 https://lightburnsoftware.com/collections/frontpage/products/lightburn-dspCorelDraw and AutoCAD are suggested. You can design all your artworks in these two software and then send to the RDWorks software to set the parameters easily.JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAWAs long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we've provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too.No, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.
you can closely monitor your lasers and position designs directly on products laid out on your machine's workspace.
4" laser head
Broaden your etching capabilities with a 4" focal lens, ready to install inside a laser head.
It is suitable for engraving high precision photos and also a good performer on 3D engraving.
Get in touch
103 Rossland Road SE,
Medicine Hat Alberta, Canada